MIG/MMA/WIG/TIG/CUT INV. WELDING SYSTEM - MULTISA200ACDC

highlights

• gas pre-flow time: 0-10 s
• gas post-flow time: 0 - 10 s
• spot welding frequency: 0.5 - 15 s
• spot welding time: 0 - 15 s
• MMA welding
  • welding current range 10 - 160 A
  • hot start time 0 - 2 s
• MIG welding
  • welding current range 30 - 200 A
  • welding wire thickness: Ø 0.6 | 0.8 | 0.9 | 1.1 mm
  • wire feed speed: 1.5 - 15 m/min
  • current lowering time: 0 - 1 s
  • current rise time: 0 - 1 s 
• TIG welding
  • welding current range: 10 - 200 A DC
  • welding current range: 20 - 200 A AC
  • pulse frequency DC: 0.5 - 150 Hz
  • pulse frequency AC square wave hard: 0.5 - 150 Hz
  • pulse frequency AC square wave soft: 0.5 - 10 Hz
  • pulse frequency AC triangle: 0.5 -10 Hz 
  • pulse frequency AC sine: 0.5 - 10 Hz
  • basic pulse ratio: 5-95%
  • base pole current: 3 - 95
  • TIG arc ignition: HF/Lift
  • TIG-PULS welding (hard:): AC peak current: 20 - 125 A
• Plasma cutting
  • Cutting current range: 20 A - 40 A
  • max cutting thickness 12 mm
  • Operating air pressure: 2.5 - 5 bar (0.25 - 0.5 MPa)
  • Air flow rate 60 - 100 l / min

Included in delivery: plasma torch, TIG torch, MIG torch, electrode holder, torch cap (short/long), spacer for plasma torch, gas nozzles, clamping sleeve housing and clamping sleeves, gas hose, earth clamp, pressure relief